D6300 Firmware Version 1.0.0.88 (All Regions Except NA & Germany)

Enhancements and Changes

Bug Fixes

  1. Port Forwarding: When disable(delete) an Inbound Firewall Rule and then enable(rebuild) it, It will not work,Unless reboot the router
  2. Diagnostics: Nslookup result is a IPv6 address
  3. Genie: Genie ReadyShare page cannot open
  4. QoS: Added a priority for MAC address GUI is error
  5. Port Forwarding: No warning message when move position is error
  6. D6300 - no internet access on 5 GHz guest network, DNS  IP address must be set manually
  7. Setup wizard page error when router is connected to PPTP server
  8. DNS display issue
  9. Can't visit internet when connection mode is static ip address through setup wizard
  10. To ping IPv6.google.com in 6 to 4 mode fail after 2 hours
  11. Recurrence pattern doesn't display fully
  12. After enabling parental control, advanced page still displays the previous DNS.
  13. QoS rule of Ethernet LAN port doesn't work
  14. Sending logs to syslog server not working (Block site log)
  15. Sending logs to syslog server not working
  16. Unable to access the wireless settings and Guest settings after updating the NETGEAR Genie app.
  17. Netgear genie app on apple mobile device has no access to router settings
  18. Fixed the issue that Genie cannot detect new firmware.
  19. Fixed the issue that Genie cannot support 5GHz part.
  20. Warning message is incorrect in port triggering
  21. USB printer issue
  22. GUI doesn't auto skip to "Rebooting the router now, please wait…" page when configuring v6 as Fixed
  23. Connection Status page displays too small to see the buttons in this page in DHCP mode
  24. Pop up error message when set valid interface ID
  25. Some issues about GUI - WiFi schedule page
  26. GUI displays as 'Unknown Error: 1' when upgrading the firmware with incorrect size.
  27. LAN PC can ping primary WAN IP when plug out WAN wire with DHCP mode and DNS displays abnormally in some cases
  28. Fixed once traffic meter limit is reached, connection is blocked, disabling TM through NETGEAR Genie won't re-open the connection. Click [Apply] button in router web GUI can make the router reconnect to internet again.

To Upgrade

To reach the Upgrade menu, click Router Upgrade from the Maintenance section. To upload new firmware:

  1. Using the Download Link below, download and extract the new firmware to a convenient place such as your desktop. The filename after extracting is D6300-V1.0.0.88_1.0.88.chk
  2. Using a browser, login to the router as admin.
  3. Under Maintenance click Router Upgrade.
  4. Click Browse and locate the upgrade firmware file you just downloaded and unzipped.
  5. Click Upload. Wait for the upgrade progress bar to complete and final prompt to appear.

 

This product includes software code developed by third parties, including software code subject to the GNU General Public License ('GPL') or GNU Lesser General Public License ('LGPL'). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL Code and LGPL Code used in this product, are available to you at NETGEAR's Open Source Code Web page. The GPL Code and LGPL Code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For details, see the GPL Code and LGPL Code for this product and the terms of the GPL and LGPL.