GS728TS, GS752TS, GS728TPS and GS752TPS Firmware Version 5.3.0.26

Fixed issues

• Auto-VoIP messages of 'send failed'.
• Some configuration lost after upgrading from 5.3.0.17 to 5.3.0.25
• XSM7224S - christian linnemann -XSM Stackhangs up
• hapiL3AsyncTask crashed in GS7xxTPS stack system
• Request to modify default voice and video VLAN setting on GS7xxTS/TPS

Known issues

1. Port is incorrectly up when insert 100BaseFX SFP module to port 25/26 (GS728TS/TPS) or port 49/50 (GS752TS/TPS).
   [Workaround] The 100Base-FX SFP module is not supported on port 25/26 of GS728TS and GS728TPS or port 49/50 of GS752TS and GS752TPS. Those ports only support 1Gbps SFPs or 10Gbps SFPs. The 100BaseFX optic can be used on the rest of SFP ports on these platforms.

Notes

1. This firmware release support dual firmware image. Before upgrade a stack system, please make sure that the ‘Next-active’ field under ‘Maintenance > File Management > Dual Image status’ pages are the same. They should be set to ‘image1’ as factory default.
2. Netgear 10G SFP+ AXM761/762/763 can be used for long-distance stacking for GS7xxTS/TPS. However, the stacking bandwidth is still 2.5G per port.